sr.(01)
Triple Walled SS Chamber, Complete with accessories.
| DIA x DEPTH | |
| AHP-1 | 400mm x 600mm |
| AHP-2 | 400mm x 1100mm |
| AHP-3 | 500mm x 900mm |
| AHP-4 | 500mm x 1200mm |
ADDITIONAL FACULTIES AT AN EXTRA COST:-
a) The pressure control switch (Automatic)
b) Automatic Water level Cut of device
c) Timer 0-60 Minutes
d) Dial Thermostat
e) Digital Temperature display
f) Automatic temp. recorder system
g) NON-ELECTRONIC/LPG Heating System
h) For triple-walled
i) Neoprene Rubber Gasket Jointless
Dia. : 25cm 30cm 35cm 45cm 55cm
sr.(02)
1. Design: High Pressure High Vacuum Horizontal Cylindrical Sterilizer single door, automatic, suitable for operation on electricity.
2. Electric load: 20KW.
3.
Capacity: minimum 200
liters.
4.
The unit will have
a.
Chamber and door plate made of stainless steel 316 quality,
b.
Back plate and steam generator
of stainless-steel argon-arc
welded with tubular mild steel stand.
c. The jacket will be made of boiler
quality steel.
5.
The unit also will be incorporated with water ring
vacuum pump to create vacuum of 24” when the temperature of cooling water to
the pump is less than 30°C for total evacuation of the air from the chamber, thus allowing complete sterilization
of the load in shortest possible time.
6. Steam working pressure 2.1Kg/cm2 corresponding to working temperature of 134°C.
7.
The Sterilizer will be
incorporated with the following mountings and fittings:
a)
Automatic with pre-selected programs and variable program
b)
Self-sterilizing vacuum drier
c)
One spring loaded safety valve and
one vacuum breaker.
d)
Chamber discharge line will consist of one plug
screen, one swing check valve, one steam
trap.
e) Automatic
self-locking device - The door will
have automatic locking device when it is under
pressure.
f) Stainless
steel electric steam generator fitted with 3nos. 6KW heaters each, one low water protection and one automatic
pressure controller, one air break contactor with on/off switch indicating lamps, gauge glass assembly for the
steam generator will have 2nos.
automatic shut off valves. The
heaters will be mounted on a thick stainless
steel plate.
g) The jacket will be insulated with glass wool and covered with stainless
steel cover.
8.
The sterilizer will be provided with SPECIAL type of
COPPER SENSOR and other related accessories
for boiler by which you can save the ELECTRIC and WATER consumption drastically and by which you can save the overall cycle time.
9. The unit will
be provided with High Pressure Feed Water Pump for filling of water into the steam generator when under pressure with interconnecting piping etc.
10. The Heart
of the system is PLC based microprocessor with the facility of HMI (Human- Machine-Interface) which is incorporated with the sterilizer.
11. The digital display at front panel will show the following parameters:
i.
Chamber temperature
ii.
Cycle no.
iii.
Batch no.
iv.
Time & Date
v.
Alarm indicator
vi.
Error display
vii. Low water indicator
12. Printer - Printer that will automatically and
continuously monitor and record dates, time of
day, load, identification no. and operating parameters i.e., temperature and residence time, throughout the length of the
autoclave cycles.
13. The unit will be manufactured as per ISI specifications and also will bear ISI certification Mark IS:3829(Part-II), ISO : 13485 :
2016, CE certified.
Autoclave: steam sterilizers with minimum 200-liter capacity
